新闻动态
新闻动态 当前位置:首页>新闻动态>新闻动态

光纤激光切割机该如何使用和保养方法:

网址:www.www-com-cn.com  2019-04-23  作者:admin    阅读:

1)经常检查钢带,一定保证拉紧。不然在运行中出了问题,有可能就会伤到人,严重还能导致人员死亡。钢带看似小东西,出了问题还是有点严重的。
1) Check the steel strip regularly to ensure tightening. Otherwise, if there are problems in operation, people may be injured, and people may die seriously. The steel strip looks like a small thing. The problem is still a little serious.
2)每六个月检查轨道的直线度及机器的垂直度,发现不正常及时维护调试。没有做这个的,有可能切割出来的效果就不怎么好,误差会增加,影响切割质量。这个是重中之重,必须要做的。
2) Check the straightness of the track and the perpendicularity of the machine every six months, and find out the abnormal maintenance and debugging in time. Without this, it is possible that the effect of cutting is not so good, and the error will increase, which will affect the cutting quality. This is a top priority and must be done.
3)每周一次用真空吸尘器吸掉机器内的粉尘和污物,所有电器柜应关严防尘。
3) Vacuum cleaner is used once a week to absorb the dust and dirt in the machine. All electrical cabinets should be closed to prevent dust.
4)各导轨应经常清理,排除粉尘等杂物,保证设备正常齿条要经常擦拭,加润滑油,保证润滑而无杂物。导轨要经常进行清理和上润滑油,还有就是电机也要经常的进行清理和上润滑油,机器在行进中就能更好的走位,更准确的切割,切割出来的产品质量就会提高。
4) All guideways should be cleaned regularly, dust and other impurities should be removed, normal racks www.huafenchimoju.com.cn www.tongdiaojz.net1 www.dianlancaomoju.cn www.luyashimoju.cn www.moduanjian.cn www.mianshoutao.cnof equipment should be wiped regularly, lubricating oil should be added to ensure lubrication without impurities. The guide rail should be cleaned and lubricated frequently, and the motor should also be cleaned and lubricated regularly, so that the machine can move better and cut more accurately, and the product quality will be improved.
5)双焦距激光切割头是光纤激光切割机上的易损物品,长期使用,导致激光切割头损坏。
5) The double focal length laser cutting head is a vulnerable item on the optical fiber laser cutting machine, which has been used for a long time, resulting in the damage of the laser cutting head.

转让电话
13313028229